george@ledcontrollerfactory.com

   >   News

News

Common Question of LED strips

1. The width of the light strip.

There are 4 types of LED light strips according to their width: 6mm/8mm/10mm/12mm, etc. The general board width of 3528 is 8mm, and the general board width of 5050 is 10mm.

 

2. How to install the LED Strip?

There is a self-adhesive 3M double-sided tape on the back of each LED light strip. When installing, you can directly remove the sticker on the surface of the 3M double-sided tape, and then fix the LED Strip on the place where it needs to be installed and press it flat by hand; or the product Comes with a transparent card.

 

3. What should be paid attention to when packaging the light strip?

Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. There will be printed labels on the regular LED light strip packaging bags and reels instead of printed labels.

 

4. What is the working temperature and storage temperature of the light strip?

  LED lights generally work at high and low temperatures. However, under normal circumstances, the life of the light strips that work at high temperatures for a long time will be shorter, and the lifespan will be longer at low temperatures; the storage temperature is generally lower and higher than the lowest and highest operating temperature.

 

5. How to choose LED strips power supply and LED Strip Controller?

LED strip power supply and LED Controller: Because the power supply and controller is not distributed when buying LED light strips, after calculating the length of the required LED light strips, the power of the required power supply should be calculated, and then the power supply should be matched. Different LED strips have different power, so choose the matching power supply carefully. For LED Controller, we suggest you try milight led controller and The following lists the power of LED strips:

3528 LED strip: 12V, 30 LEDs per meter, power 2.4W per meter

 

3528 LED strip: 12V, 60 LEDs per meter, power 4.8W per meter

 

5050LED strip: 12V, 30 LEDs per meter, power 7.2W per meter

 

5050LED strip: 12V, 60 LEDs per meter, 14.4W per meter

 

For example, if you buy a 5050 LED strip, and the matching power supply is 12V, 4A specifications, then a power supply can only carry 6 meters of 5050 LED strips. Because the power of 5050 LED strip is 7.2W per meter, 6 meters total 43.2W, and the rated power of the power supply is 48W, it is generally not recommended to use the power supply at full load, because it will have a great impact on the life of the power supply, and it is recommended to use only the power supply. 95%.

Contact Us

Contact: George

Phone: 18813672892

Tel: 0755-87961814

Add: 2 Floor Building 2 Bai Li Heng Tai Tech Park,Liaokeng,Shiyan Town,Bao'an Distric, Shenzhen City

Scan the qr codeClose
the qr code